IMC-0402-01 www.vishay.com vishay dale revision: 18-sep-13 1 document number: 34163 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 wirewound, surface mount inductors note (1) value obtained when current flow s and temperature has risen 15 c features ? excellent solderability and resistance to soldering heat ? suitable for reflow soldering ? high reliability and easy surface mount assembly ? wide range of inductance values available ? tape and reel packaging for automatic handling, 10 000/reel eia 481 ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 electrical specifications inductance range: 1 nh to 47 nh operating temperature: - 40 c to + 125 c storage temperature: - 40 c to + 125 c test equipment ? inductance is measured in hp4287a rf lcr meter with hp16193 fixture ? q is measured in hp4287a rf lcr meter with hp16193 fixture ? srf is measured in hp8753e rf network analyzer ? dcr is measured in hp4338b millohmeter standard electrical specifications ind. (nh) tol. test freq. (mhz) q min. srf min. (mhz) dcr max. ( ? ) rated dc current (ma) (1) l & q 1.0 0.3 nh, 0.2 nh 250 13 6000 0.045 1360 1.9 0.3 nh, 0.2 nh 250 16 6000 0.070 1040 2.0 0.3 nh, 0.2 nh 250 16 6000 0.070 1040 2.2 0.3 nh, 0.2 nh 250 18 6000 0.070 960 2.4 0.3 nh, 0.2 nh 250 16 6000 0.068 790 2.7 0.3 nh, 0.2 nh 250 16 6000 0.120 640 3.3 0.3 nh, 0.2 nh 250 20 6000 0.066 840 3.6 0.3 nh, 0.2 nh 250 20 6000 0.066 840 3.9 10 %, 5 % 250 20 6000 0.066 840 4.3 10 %, 5 % 250 18 6000 0.091 700 4.7 10 %, 5 % 250 15 4775 0.130 640 5.1 10 %, 5 % 250 23 5800 0.083 800 5.6 10 %, 5 % 250 23 5800 0.083 760 6.2 10 %, 5 % 250 23 5800 0.083 760 6.8 10 %, 5 % 250 20 4800 0.083 680 7.5 10 %, 5 % 250 25 5800 0.104 680 8.2 10 %, 5 % 250 25 4400 0.104 680 8.7 10 %, 5 % 250 18 4100 0.200 480 9.0 10 %, 5 % 250 25 4160 0.104 680 9.5 10 %, 5 % 250 18 4000 0.200 680 10 5 %, 2 % 250 23 3900 0.195 480 11 5 %, 2 % 250 26 3680 0.120 640 12 5 %, 2 % 250 26 3600 0.120 640 13 5 %, 2 % 250 24 3450 0.210 560 15 5 %, 2 % 250 26 3280 0.172 560 16 5 %, 2 % 250 24 3100 0.220 560 18 5 %, 2 % 250 25 3100 0.230 420 19 5 %, 2 % 250 26 3040 0.202 480 20 5 %, 2 % 250 25 3000 0.250 420 22 5 %, 2 % 250 25 2800 0.300 400 23 5 %, 2 % 250 26 2720 0.214 400 24 5 %, 2 % 250 25 2700 0.298 400 27 5 %, 2 % 250 26 2480 0.300 400 30 5 %, 2 % 250 25 2350 0.300 400 33 5 %, 2 % 250 24 2350 0.350 400 36 5 %, 2 % 250 26 2320 0.403 320 39 5 %, 2 % 250 25 2100 0.550 320 40 5 %, 2 % 250 26 2240 0.438 320 43 5 %, 2 % 250 25 2030 0.810 100 47 5 %, 2 % 200 26 2100 0.830 150 51 5 % 200 25 1750 0.820 100 56 5 % 200 22 1760 0.970 100 68 5 % 200 22 1620 1.120 100 82 5 % 150 20 1500 1.250 100 100 5 % 150 20 1300 2.520 100 120 5 % 150 20 1100 2.660 100 dimensions in inches [millimeters] 0.039 0.004 [1.00 0.1] 0.022 0.004 [0.55 0.1] 0.008 0.004 [0.20 0.1] 0.020 0.004 [0.50 0.1] 0.010 ref. [0.25] description IMC-0402-01 10 nh 5 % er e4 model inductance value inductance tolerance package code jedec lead (pb)-free standard global part number i m c 0 4 0 2 e r 1 0 n j 0 1 product family size package code inductance value tol. series
IMC-0402-01 www.vishay.com vishay dale revision: 18-sep-13 2 document number: 34163 for technical questions, contact: magnetics@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 performance graphs (IMC-0402-01) tape and reel specifications in inches [millimeters] reel dimensions tape dimensions recommended pattern model units per reel model a b t model a b c IMC-0402-01 10 000 IMC-0402-01 0.028 [0.70] 0.047 [1.20] 0.028 [0.70] IMC-0402-01 0.018 [0.45] 0.063 [1.60] 0.0256 [0.65] 1 10 100 1000 0 20 40 60 80 100 120 140 160 q 12 nh 27 nh 5.6 nh 47 nh 1 nh IMC-0402-01 q vs. frequency frequency (mhz) IMC-0402-01 ls vs. frequency 0 1 10 100 1000 10 000 frequency (mhz) inductance (nh) 47 nh 27 nh 12 nh 5.6 nh 1 nh 1 10 100 0.08 0.02 [2.0 0.5] 0.51 0.02 ? [13.0 0.5] 0.83 0.03 ? [21.0 0.8] 7.0 0.08 [178.0 2.0] 0.098 [2.5] 0.315 [8.0] t 0.1 0.002 [0.3 0.05] 0.002 [ 0.05] 0.07 0.002 [1.75 0.05] a 0.004 [ 0.1] 0.08 [2.0] b 0.004 [ 0.1] 0.315 0.008 [8.0 0.2] 0.158 0.004 [4.0 0.1] 0.08 0.002 [2.0 0.05] 0.14 0.002 [3.5 0.05] a b c
legal disclaimer notice www.vishay.com vishay revision: 08-feb-17 1 document number: 91000 disclaimer ? all product, product specifications and data ar e subject to change with out notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of th e products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, includ ing warranties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain types of applicatio ns are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular applic ation. it is the customers responsibility to validate tha t a particular product with the prope rties described in the product sp ecification is suitable for use in a particular application. parameters provided in datasheets and / or specifications may vary in different ap plications and perfor mance may vary over time. all operating parameters, including ty pical parameters, must be va lidated for each customer application by the customer s technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product could result in personal injury or death. customers using or selling vishay product s not expressly indicated for use in such applications do so at their own risk. please contact authorized vishay personnel to obtain writ ten terms and conditions rega rding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners. ? 2017 vishay intertechnology, inc. all rights reserved
|
